Brief Description of some products on Su-30MK Aircraft project


DRIVE GENERATOR GP25 


It is intended for supplying the electric power to the electrical system of the main unit. It consist of an AC generator equipped with a hydraulic blade constant speed drive. The constant speed drive provides the generator shaft rotational speed of 12000 rpm.

 

 

 

 

 

 

 

 

 

 

Rated power, kVA

60

Temperature range, °С

-40...+140

Input shaft rotational speed, rpm

4500-9000

AC current frequency, Hz

400±4

Rated current voltage, V

115/200

Weight, kg

43

AUTOMATIC PREESURE DEVICE AD-5(A) 


The automatic pressure device is intended for supply into the pneumatic sleeves of the anti-overloading. This device is an apparatus which automatically change pressure in the suit depending on overloading. The device is delivered in the same set with AD-5M filter designed for air cleaning of admixture. The automatic pressure regulator operates in conjointly with the AD-5M filter. When the automatic pressure regulator used without filter AD-5M, provision should be made cleaning of the air supplied with fineness of filtration not more 16 mkm

 

Serviceability at overload range, g

1,75...10 (2...10)

Working environment temperature range, °С

-60...+55

The automatic pressure regulator should operate reliably with air supplied to the filter and regulator without condensed moisture at pressure, МПа

0,06-0,5(0,12-1)

at temperature, °С

0…+55

Weight with filter, kg, not more

1,238

 

CAPSULE GAS TEMPERATURE DETECTOR ТDK 


Is intended to give a signal which is logged as a differential pressure and depend on the environment temperature around detector.

 

Working fluid

fuel RT, T-1, TS-1, T-8V, T-6

Fuel pressure, MPa

on inlet of unit

2,2

on drain from unit

0,04-0,35

Temperature, °С:

of fuel at inlet of unit

-50…+120

of the environment

-60...+220

Overall dimensions, mm

112х127,5х122,5

Weight, kg, not more

1,2


HAND HYDRAULIC PUMP NR01/1 

Hand hydraulic pump NR01/1 is intended for working liquid supply into hydraulic system of object in case of failure of the main hydraulic system and for technical service on the ground.

 

Working liquid oil

АМG-10, 7-50СЗ

Working liquid and ambient temperature, °С

-60...+60

Maximum working pressure with the liquids, kgf/cm2

-АМG-10

250

-7-50С-3

350

Maximum working pressure at transition from 1 stage to 2 stage with the liquids, kgf/cm2

-АМG-10

45...55

-7-50С-3

45...75

Pressure at pump input, kgf/cm2

0,8

Pump displacement during 10 cycles (double strokes) at pumping speed 1 cycle per second, working liquid at ambient temperature + 25±10 °С and pressure, equal to height of working liquid column above the inlet terminal axis 100 mm:

at pumping pressure 35 kgf/cm2, сm3

not less 300

at pumping pressure 210 kgf/cm2, сm3

not less 85

Handle tension at pumping pressure 210 kgf/cm2and working liquid temperature +25±10 °С with 800 mm lever, kg

not more 18

Dry weight, kg, not more

3,5

 

4030, 4030А FUEL-OIL UNITS


Place of installation: Su-30 and modifications thereof, MiG-29, ГТДЭ-117-1 engine of auxiliary engine unit

Intended use: lubricant supply to the gas turbine engine of ГТДЭ-117 power generation module, pumping lubricant from ГТДЭ-117 bearings cavities, fuel supply to the engine on startup and fuel consumption control when ГТДЭ-117 operates in power generation mode.

 

CENTRIFUGAL PUMPS  

(these pumps are intended for head or pumping fuel, for limitation of pressure fuel line, for spirit feeding)

Article part No.

Q, l/hour

Inlet pressure, P, kg/cm2

Outlet pressure, P, kg/cm2

N, rpm


DTSN-80

 

 

DTSN-80T

 

 

DTSN-82

31000

 

 

31000

 

 

81000

0.50…3.30

 

 

0.50…3.30

 

 

0.45…3.50

16.0…18.00

 

 

16.0…18.00

 

 

6.80…8.30

8750

 

 

8750

 

 

8000

 

AXIAL AND PLUNGER PUMPS WITH AN END DISTRIBUTION OF THE WORKING FLUID 

(pumps are intended for feeding the systems of control of hydraulic system units as well as units from other systems with a working fluid or high pressure)

Article part No.

Working volume, V, cm3/cycle

N, rpm 

Inlet pressure, P, kg/cm2

Outlet pressure, P, kg/cm2

Picture

NP-128

56

4200

4.20

280

-

NP-160D

23

4000

1.65…8.50

210

-

NP-96M

20

2000…4300

1.50…7.50

200

 

CENTRIFUGAL PUMPS WITH ELECTRIC DRIVE

(pumps are intended for pumping or feeding fuel, liquid toxic chemical and other fluids, for reaching necessary required pressure and liquid circulation)

Article part No.

Q, l / hour

D P, kg/cm2 (net less)

I, A (not more)

N, rpm (not less)

Picture

ETSN-45S

10000

0.40

28.0

4000

ETSN-45B

10000

0.40

28.0

4000

ETSNG-10

12000

0.70

4.0

5500

ETSNG-40

40000

0.80

14.2

5550

 

 

OPTICAL-ELECTRONIC AIMING SYSTEM INTERFACE BLOCK WITH ADC&DAC CONVERSION 23C/01M

Designed for an old 23C/01 interface block with substitution and repair. They are operating with the Optical-electronic aiming systems of the MiG-29 and Su-27 fighter aircrafts.

The new version of 23C/01, the 23C/01M is made with the new componrents and the state of art technology. It has improved ADC and DAC characteristics and reliability.

 

The interface block provides:

- signals voltagesmeasurements with the AD conversion and processing these values to the binary serial interface code words

- receiving control information for the Optical-electronic aiming system from the weapon control system computer, processing it to the analog voltages and commands, and also sending the information from the Optical-electronic aiming system to the weapon control system computer and display system computer by the serial interface lines

- half wave interval of AC supply voltage measurement and converting it to digital code.

 

Technical characteristics:

 

Analog to digital conversion error less then 0.2% from the reference voltage level

Half wave interval measurement error...................................................less then ±2μs

Code word length.......................................................................................32 bit

Serial interface lines...................................................................................5

Power consumption (from the AC 110...122V)......................................less then 15VA

Continuous time of operating...................................................................more then 3 hours

 


 

SOME HISTORY FACTS





10,000

Tonnes of iron
Shot at Siege of Sebastopol during Crimean War





144,000

Revolutions per minute
Does a bullet fired from Lee Enfield rifle, as used in both world wars





2,000

Women
The Nizam of Hyderabad raised in 1975 for his war against the Marathas





130,000

Meters
Is an effective range of Big Bertha, the World War I howitzer


Interested in partnership opportunities? Contact us

Contact Information

ABOUT SPETS TECHNO EXPORT

State Foreign Trade Enterprise “SpetsTechnoExport” is a fully state-run entity incorporated by the Government of Ukraine in 1998 for export-import activities at foreign armaments markets.

HEAD OFFICE

7, Stepana Bandery Avenue
Kyiv, 04073, Ukraine
tel: +380 44 5685070
fax: +380 44 5685068

LIAISON OFFICE

B-5/147 Safdarjung
110057, New Delhi
tel: +91 11 26153792
fax: +91 11 26153830

OUR NEWSLETTER

Subscribe to automatically receive STE press releases.


STE, Спецтехноекспорт, Спецтехноэкспорт

Разработка сайтов - PHAR